How may of you have tried vision yet

[andy w]

I tried it today while working, i found it a bit strange for a start this morning, i could tell when the old RO had finished coming through the hose as the bubbles started View attachment 3427

it concerned me for a start as it made the water seem gloopy and syrupy, i did think it made the brush glide easier while using (unless that was me imagining it ) as for rinsing it did seem a bit strange on the hydrophillic glass with the bubbles but it seemed to run off well, on the hydrophobic glass it rinsed well, all day i was using pencil jets and used my pump controller on the setting i always use it at. i would say that i used about 50 litres less water today than normal.

I went back to check on a few windows at the end of the day and they have all dried fine with no spotting (plus no complaints from anyone as yet) :thumbsup:

i will keep using it for now and see how it goes over time

 

[comby]

ived tried it a few times now, and i havent really noticed any difference. im not knocking the product because like i said its only been a couple of times. most people seem to be getting on with it though because theres been lots of positive comments. dont know if youhave to use it numerous times on the same glass to get it sheeting better because i havent noticed the glass to be any different and ive done my house a couple of times!

I tried it today while working, i found it a bit strange for a start this morning, i could tell when the old RO had finished coming through the hose as the bubbles started View attachment 5415it concerned me for a start as it made the water seem gloopy and syrupy, i did think it made the brush glide easier while using (unless that was me imagining it ) as for rinsing it did seem a bit strange on the hydrophillic glass with the bubbles but it seemed to run off well, on the hydrophobic glass it rinsed well, all day i was using pencil jets and used my pump controller on the setting i always use it at. i would say that i used about 50 litres less water today than normal.

I went back to check on a few windows at the end of the day and they have all dried fine with no spotting (plus no complaints from anyone as yet) :thumbsup:

i will keep using it for now and see how it goes over time /emoticons/smile.png

 

[comby]

It does feel strange having to leave windows with soap on them and u got wording spot on making water gloopy put all his well when drys what your mixture ratio and how do u mix I've tried just putting in top of tank and now today for tomoz mixed 4 squirts in 4 pint pots and added while filling up cos today sometime felt like I didn't mix it Wright today cos sometime didn't feel like was working and then it did example first thing nothing then bang on for 3 hrs then 1 hour not then all afternoon great and enjoyed it when was working wright that why I like it cos I didn't like it when it wasn't working good so must be good to won't working all the time

 

[Tuffers]

I tried it today while working, i found it a bit strange for a start this morning, i could tell when the old RO had finished coming through the hose as the bubbles started View attachment 5415it concerned me for a start as it made the water seem gloopy and syrupy, i did think it made the brush glide easier while using (unless that was me imagining it ) as for rinsing it did seem a bit strange on the hydrophillic glass with the bubbles but it seemed to run off well, on the hydrophobic glass it rinsed well, all day i was using pencil jets and used my pump controller on the setting i always use it at. i would say that i used about 50 litres less water today than normal.

I went back to check on a few windows at the end of the day and they have all dried fine with no spotting (plus no complaints from anyone as yet) :thumbsup:

i will keep using it for now and see how it goes over time /emoticons/smile.png

Good pic Andy. Wouldn't it be ace if every window rinsed like that :h:

 

[Tuffers]

It does feel strange having to leave windows with soap on them and u got wording spot on making water gloopy put all his well when drys what your mixture ratio and how do u mix I've tried just putting in top of tank and now today for tomoz mixed 4 squirts in 4 pint pots and added while filling up cos today sometime felt like I didn't mix it Wright today cos sometime didn't feel like was working and then it did example first thing nothing then bang on for 3 hrs then 1 hour not then all afternoon great and enjoyed it when was working wright that why I like it cos I didn't like it when it wasn't working good so must be good to won't working all the time

I had a thought. If you add Vision to your tank and drive to your first job, it'll mix right? I was thinking that if you didn't move your van much, was it becoming detached from the pure? I noticed that the bubbles came and went at times today.

 

[andy w]

Good pic Andy. Wouldn't it be ace if every window rinsed like that :h:

It would! Wish all the windows i do were like that instead of some of the :turd: ones on my round!

 

[andy w]

I had a thought. If you add Vision to your tank and drive to your first job, it'll mix right? I was thinking that if you didn't move your van much, was it becoming detached from the pure? I noticed that the bubbles came and went at times today.

Mine stayed all day it was like a foam party :balloondance:

 

[Duncs]

Interesting with the feed back let's see how it goes

 

[SPCleaning]

I'm reading the feedback with interest too.

 

[andy w]

It does feel strange having to leave windows with soap on them and u got wording spot on making water gloopy put all his well when drys what your mixture ratio and how do u mix I've tried just putting in top of tank and now today for tomoz mixed 4 squirts in 4 pint pots and added while filling up cos today sometime felt like I didn't mix it Wright today cos sometime didn't feel like was working and then it did example first thing nothing then bang on for 3 hrs then 1 hour not then all afternoon great and enjoyed it when was working wright that why I like it cos I didn't like it when it wasn't working good so must be good to won't working all the time

I have a 400 litre tank and just put 4 squirts in as it was filling on saturday, no mixing or anything, just drove to my first job today and started work:thumbsup: mind you my driving is enough to mix it :rofl:

 

[Smurf]

I keep stairing at the little bottle in front of me thinking wtf I paid good money for that /emoticons/biggrin.png

 

[Smurf]

Well my first impression is....

The plunger on the bottle is **** as mine would not work properly. And yes I turned it to the open position before any one asks. After messing about over the kitchen sink to try to get it to work properly it jams up so I also wasted quite a bit too and now will not turn back to the locked position either. So all in all was not a great start

Has anyone had the same issue?

 

[Smurf]

I've just had to force the plunger back up so it now locks.

Lets just hope now after all that it works in me tank or should I get a big spoon to stur it up /emoticons/biggrin.png

 

[Tuffers]

Well my first impression is....
The plunger on the bottle is **** as mine would not work properly. And yes I turned it to the open position before any one asks. After messing about over the kitchen sink to try to get it to work properly it jams up so I also wasted quite a bit too and now will not turn back to the locked position either. So all in all was not a great start

Has anyone had the same issue?

I had the same problem Smurf. I nearly turned it to face me and try squirting it, but I thought better of it /emoticons/biggrin.png. It works ok now.

 

[Smurf]

At least I'm not the only one that smells of fecking oranges /emoticons/biggrin.png

 

[Tuffers]

Here's an example of a window I cleaned today. You can see one side has sheeted and the other has not. Weird! I believe on philic glass it does make rinsing quicker but I'm not convinced that it will make phobic glass sheet like philic. Maybe it will, but I can't see it happening /emoticons/sad.png

 

[Smurf]

So putting extra in the tank made no difference then @Tuffers

 

[Smurf]

I'm sure it will not make much difference as the fines of the glass are pointing the other way up on that bit of phobic glass hence why it don't sheet.

 

[Tuffers]

So putting extra in the tank made no difference then @Tuffers

No.

 

[Tuffers]

I'm sure it will not make much difference as the fines of the glass are pointing the other way up on that bit of phobic glass hence why it don't sheet.

You could actually be onto something there Smurf :thumbsup:

 

[Smurf]

It's rolled during the manufacturing process in one direction so must have an effect on how the fines are formed on the surface of the glass.