B
bill
I just used my rapier ptrol washer and it wont tick over on low revs it okay when lance trigger is pulled in bit when you stop washing it cuts out help
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
No havent changed anything ill have a look now thanks smurfCheck your return to tank valve is not stuck maybe?
Have you made any adjustment to the washer recently?
I do eactly the same but when its on low revs when i take trigger off it cuts out half revs and up its alrightI start mine on min revs first with the trigger pulled so it starts up and allows the pump to start sucking water through to the lance. Once the water starts flowing consistantly out of the lance under pressure I then increase the revs to the working speed/psi I want to run and away I go.
Cheers smurfCome to think of it mine does the same thing so once I have the lance/pump primed I start it again on halfish revs then wack it up heigher to 3/4 to full revs depending what I'm doing.