Squeak and Bubbles
Well-known member
- Messages
- 1,016
- Location
- Leeds
Got a 4040 RO setup, my water pressure is around 35-36psi, looks like I need a booster pump, what would you guys recommend?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Don't worry guys, don't have to rush to answer.... Got it sorted. Just used an old Shurflo pump... it's rocking now.
It's cool... Just wasn't sure, but after chatting to some tech guys on the phone they gave me a few tips. Forgot I had an old pump..didnt know the answer so did not want to do a H and give you loads of /emoticons/biggrin.png /emoticons/biggrin.png so just left it lol
What readings you getting before you fitted booster and after mate?It's cool... Just wasn't sure, but after chatting to some tech guys on the phone they gave me a few tips. Forgot I had an old pump..
That's a good reading at 37psi mate.before booster fitted coming out at around 37psi I was getting 5-6ppm, after booster it came down to 2ppm (100psi)
Thanks for info. Connected a shurflo 100psi pump> Works a treatIf you speak to Jine at GAPS she will recommend this one.
http://www.machinema...30v-booster-pum
This was discussed on CIU forum recently and the guys recommended
http://www.machinema...ming-water-pump
and this
http://www.machinema...tails/051012200
You don't want the one that has the tank underneath.
Aldi had a couple of pumps around a while back for £50 as did B&Q. The guys who use these have had good service from them.