Aquatap / Trolley help needed please

[gwindows]

Hi all I'm having a wee problem with my pure trolley system . I have an aquatap on the top and the water has started taking its time to come out when i turn it on .It starts with a few wee squirts of water then after maybe 4/5 seconds it starts running properly .Its like there is something stuck or an air lock !! Also when brushing the window it seen to go off also .

I have tried running flat out to see if theres any blockage .

Cheers in advance

 

[Guest]

Hii gwindows, I get tis problem with the air locks, what I do

is when ive changed the barrels over, lay your pole and hose on the ground

with everything turned on, like your tap or aqua adapter, and switch on, should only take about ten seconds for it to run properly,

as for the water going off when cleaning, check your calibration on control is higher thsn your speed, hopd this helps,

 

[gwindows]

took out the pump valve and gave it a good clean /emoticons/smile.png it wasn't that dirty just a tiny bit colour in it . but its going like a rocket again , Cheers for the reply /emoticons/biggrin.png