Separate names with a comma.
Discussion in 'Water Fed Pole Cleaning' started by tench0771, Nov 9, 2015.
I am a smidge dubious as to how it will handle the constant being pulled on as you disconnect your pole each time?
I guess only time will tell but I think I will be giving it a go.
Here's a prototype, in action
I thought the same, also every time you connect/disconnect your pole you will be turning the valve on/off at the same time, which may or may not get annoying.
But going to give the whole thing a go and see.
That must work on any pole surely. If so, bye bye aqua dapter
I have to say this looks like a fantastic piece of innovation for wfp- and it's not often I say that!!
What does it mean tubeless ?
Basically its a water fed pole that as no hose attached.
It still as a small piece of tube in the top section, we call it tubeless because when you put it away back in your van and take out, it has no hose attached.
The hose that is normally attached to each of your poles is done away with.
The pole hose at least ten metres is connected to your microbore and now reeled onto your hosereel.
Ah I see, my only flaw is I use a long gooseneck on my pole for a certain job, would that not be too hard to take it all apart for that job ? If you get me I would need extra hose to go right up the goose neck , the goose neck is about 30 cm
Yes, it will be a problem, unless its the plastic type, of if your gooseneck is permanent.