Hi Lads,
i need some helping out as as to what my problem is exactly and best way to sort it. (Title pretty much explains it)
ive just added a second hose reel, pump, controller etc and when starting it either has low pressure or dead ends every 10 seconds or so.
the other reel etc is all working fine.
The hose isn’t kinked, it’s a full tank of water but the pressure is about half or 30% of what the main one I use. Also it dead ends continually!
Eventually it improves but after any sort of break in the work it starts playing up again.
heres a couple of pics of the system (it’s just a delivery system, no RO or DI)
The problem one is the one with the clear hosing.
Any suggestions or help would be great fully received - it’s driving me crackers.
ar
i need some helping out as as to what my problem is exactly and best way to sort it. (Title pretty much explains it)
ive just added a second hose reel, pump, controller etc and when starting it either has low pressure or dead ends every 10 seconds or so.
the other reel etc is all working fine.
The hose isn’t kinked, it’s a full tank of water but the pressure is about half or 30% of what the main one I use. Also it dead ends continually!
Eventually it improves but after any sort of break in the work it starts playing up again.
heres a couple of pics of the system (it’s just a delivery system, no RO or DI)
The problem one is the one with the clear hosing.
Any suggestions or help would be great fully received - it’s driving me crackers.
ar
Last edited by a moderator: