Sanding and glossing frames

[rshandyman]

from what iv seen of the good jobs the painter uses a thick coat for the final coat . the painters who use a regular coat for the final coat it never lasts very long,maybe only 2yrs . this is where the skill would be, ladelling on the final without it running

Usually with painting it is better to apply more coats then fewer but thick

 

[boarcity]

maybe what im seeing [on the good looking jobs] is 3 coats rather than 2 ?. its a guess

 

[rshandyman]

Difficult to say.depends if it water/solvent based paint, has it been painted before, how good preparation was, even type of brush makes a difference

 

[Dave B]

With gloss there is a fine line between a good coat and too much and when that runs it looks shite

Better to do an extra thin coat than risk it with thick coats

 

[Dave B]

Bare wood behaves differently to previously painted stuff

 

[Dave B]

I did my apprentiship in a bodyshop and found that even temperature can effect paint consistency on identical surfaces

I know that is spray paint but the same would happen with tinned paint

 

[rshandyman]

That is why not easy to say.it might look good but flake and peel off in 6 months time,especially outside in frosty weather

 

[TolishAPurd]

Good quality undercoat is often what makes a great job. White on white, think of the undercoat as the colour, and the gloss as the laquer that makes it shine.

 

[SolarPanelCleaning]

Rub back to timber and apply undercoat. Leave the belt sander in the van (unless nobody is looking).

I've sorted a meticulous mate to do this today. Sort of work he likes and I can make a few bucks in top.

What could possibly go wrong.....,,,,.?

 

[Anthony @ SCS]

For handyman work, this thing is invaluable:[media]

I have the Bosch GOP250C, served me well when putting down new flooring in the house and building my new shed. Probably the best tool that ive purchased, was £170 though

 

[TolishAPurd]

I have the Bosch GOP250C, served me well when putting down new flooring in the house and building my new shed. Probably the best tool that ive purchased, was £170 though

Shame the bits are so bloody expensive, but like you say I couldnt be without it now.

 

[Anthony @ SCS]

Very true, but take into account purchasing a replacement head (which ever head you use on the job) when quoting and your sorted.

 

[TolishAPurd]

Very true, but take into account purchasing a replacement head (which ever head you use on the job) when quoting and your sorted.

Yep. I always factor in an extra three/four heads when I use that tool lol. :thumbsup: Saxon blades on ebay are very good for the price.

 

[Anthony @ SCS]

Got a couple of decorating jobs just before my operation next month and possibly a new floor so get to play with my toy again.

 

[rshandyman]

I have just bought myself nice toy

http://www.ffx.co.uk/tools/product/Fein%20Fmm350Q%204014586877570%20240V%20New%20Multimaster%20350Q%20Top%20Kit%20350W

 

[TolishAPurd]

That looks nice mate. Good price too, I've bought a lot of stuff from them off ebay, never been let down.

 

[rshandyman]

It is really good tool it is 3 times more expensive but as long as it works for more than 3 years(which is warranty for) I am fine with that.a bit loud on highest setting but still feels solid and apparently 50% quieter than 250 one.

 

[TolishAPurd]

It'll save your **** on so many occasions.

 

[SolarPanelCleaning]

Getting asked about looooooads of reno type work. Wondering if it's worth the hassle of employing someone to do it under my supervision? It's either that, or give it away to a mate.