Same TDS reading after RO AND after DI

[Henry]

Hello!

I bought a trolly system from pure freedom yesterday. I have connected properly and flushed for around 1 hour before connecting DI. I get a reading of 350P at tap, 15 after RO and 15 again after DI?!

Could this be because j didn't flush for 2 hours and now need to flush DI filter? It been on for an hour an I now get 012 after DI. Could it be **** resin and need to replace now?

Also, aquatic resin? Same thing and resin used for window cleaning? Only stuff available I can get today

 

[AJ windows]

I'm thinking you may have cartridge on you di upside down, but if it's a new set up you should of flushed for minimum of 2 hours. Where you based?

 

[Henry]

I'm thinking you may have cartridge on you di upside down, but if it's a new set up you should of flushed for minimum of 2 hours. Where you based?

I did think this myself so I watched the pure freedom YouTube page and have it set up 'perfectly' it would seem. Yeah I think that's the problem, I didn't flush it for long enough so do you think the cartridge in DI needs time to flush through?

 

[AJ windows]

Shouldn't be coming out of di same as going in, If your local I can pop and have a look at it for you

 

[Henry]

Im

Shouldn't be coming out of di same as going in, If your local I can pop and have a look at it for you

im sleaford? I've just called my local garden center and they have some purigen resin available. Could you tell me if this will be ok for polishing the water please? Or would I need window cleaning di resin?

 

[Henry]

It seems to be exactly the same thing as window cleaning resin but just want to mAke sure

 

[AJ windows]

Never heard of it mate, it won't be your rein that's the issue tbh. Peronally I'd flush for a few more hours.

 

[Henry]

Flush more even though after RO comes out 015? The resin thAts in there is a light brown, is that normal? Should I flush with DIConnected?

 

[AJ windows]

15 is fine, did you not buy a bag of resin?

 

[Smurf]

What ro/di setup did you get?

 

[Henry]

15 is fine, did you not buy a bag of resin?

No because it was already full of resin so didn't think I needed anymore for a bit.

 

[Henry]

What ro/di setup did you get?

http://www.purefreedom.co.uk/pure-freedom-25-litre-trolley-system-package.html

 

[Smurf]

Thanks...What is your tap water tds?

http://www.purefreedom.co.uk/pure-freedom-25-litre-trolley-system-package.html

 

[Henry]

Thanks...What is your tap water tds?

About 360. Currently running at 012 after RO and 012 after DI

 

[Henry]

My resin

View attachment 3941

 

[Smurf]

So have you just taken that di resin out of the little di cansiter that goes inside the filter housing?

 

[Henry]

Yeah I unsvrewed the lid of the blue canister

 

[Henry]

...

View attachment 3942

 

[Henry]

When I test the TDS I fill the cap up and put the Meter in. If it's only touching the water its 003, then a littler further 006 and so on until the cap is full on its 011

 

[AJ windows]

Henry u half fill it tds meter cap and take reading from that, do that and tell me your reading please.

 

[Smurf]

as per pic was that the way around the di canister was in the filter housing?

...