Hydro_tech29
New member
- Messages
- 5
Hi all, am new to the site.
You would think I work for unger in relation to this thread but I dont. I just purchased the above system in addition to a freedom trolley. What a f****** amazing product!! This system allows you to produce pure water onsite or at home at a reasonable flow rate. Okay the filter sock needs replacing roughly every 1000 litres of water depending on water quality which here in Norwich is Hard-as-hell, however this isnt too high IMA. The speed with which to change the filter is approx 30 seconds. This system has so far produced 250 litres of water as I only just got it. The pole provided is decent enough, water floe thru pole is excellent even at full extension and the basic system seems great for a beginner as some cheap beginner RO machines produce roughly 25ish litres of water per hour on a drip drip basis, the 6 ltr starter unger system fills 25 litres at 000ppm approx every 10 minutes. The basis system can be added too and expanded really easily upto 4 units each containing filters. Just a point to remember if new to this system is water pressure. It has to be quite low in order for the filter to process out the **** and this isnt always made clear to a novice. Don't do what I did and accidentally flood the system with too much pressure as this will cost you approx 25 quid for a new filter.
Anyway I hope this thread is of some interest or help and thanks for reading guys.............
Steve
You would think I work for unger in relation to this thread but I dont. I just purchased the above system in addition to a freedom trolley. What a f****** amazing product!! This system allows you to produce pure water onsite or at home at a reasonable flow rate. Okay the filter sock needs replacing roughly every 1000 litres of water depending on water quality which here in Norwich is Hard-as-hell, however this isnt too high IMA. The speed with which to change the filter is approx 30 seconds. This system has so far produced 250 litres of water as I only just got it. The pole provided is decent enough, water floe thru pole is excellent even at full extension and the basic system seems great for a beginner as some cheap beginner RO machines produce roughly 25ish litres of water per hour on a drip drip basis, the 6 ltr starter unger system fills 25 litres at 000ppm approx every 10 minutes. The basis system can be added too and expanded really easily upto 4 units each containing filters. Just a point to remember if new to this system is water pressure. It has to be quite low in order for the filter to process out the **** and this isnt always made clear to a novice. Don't do what I did and accidentally flood the system with too much pressure as this will cost you approx 25 quid for a new filter.
Anyway I hope this thread is of some interest or help and thanks for reading guys.............
Steve