Hot Water ?

[Robster]

Just out of curiosity ......... do any of you pressure washing guys use a hot water machine? .......

 

[Taxlossloz]

@Eviestevie loves his steam machine

 

[Robster]

As in a doff system Taxlossloz ? or is it a normal hot pw ?

 

[Taxlossloz]

Karcher steamer he will let you know when he's on here

 

[Eviestevie]

It's a one new karcher hds industrial steamers

I love it it's beast and cleans anything

Keep getting it out more than my other machines

It's not as powerful but with the heat and pressure certainly cleans better

And I run turbo with it lol sometimes

Turbo and steam certainly looks good

 

[Robster]

Im toying with the idea that a hot water pw will be a part of my setup, you do get a better clean with them and it sterilises etc etc, do you charge a bit more for using it Eviestevie ?

 

[Green Pro Clean Ltd]

@Eviestevie , that floor job has been dealt with by the sealant company.. Insurace job perhaps?

Any word on an HDS coming this way from your brother in law?

 

[sllab]

I have a hotbox on the way. It will heat my 30lpm to about 90C but i'm not sure if that will be hot enough might have to change the pump for a 25lpm one which will get it to 108C. There is a lot of commercial work out there for me once I have the gear to do it.

 

[Taxlossloz]

What sort of work will it allow you to do ? That pressure only did not ?

 

[Robster]

I have a hotbox on the way. It will heat my 30lpm to about 90C but i'm not sure if that will be hot enough might have to change the pump for a 25lpm one which will get it to 108C. There is a lot of commercial work out there for me once I have the gear to do it.

My opinion ..... that would be fine for garage forecourts, chewing gum removal, graffiti removal, i dont think you will need to change your pump sllab, which hotbox are you getting ? if you dont mind me asking.

 

[sllab]

I am after the garage forecourts and chewing gum removal. The hot box is coming from a local supplier. All I remember from when I looked at the display model was it was rated for 350bar, Made in europe, 25lpm to 108C, 6lpm to 140C and ran off diesel with electric also required. I will have to ring and ask the supplier for anything more specific like brand etc.

Oh and a couple of weeks ago it was released onto the market. Whether that was just a slight change or a brand new unit I dont know.

Sorry I cant be more helpful until Tuesday.

 

[Robster]

No worries mate, sounds like a pretty cool piece of kit