liquidator/wagtail

[Dave B]

This is my belt setup nowadays

View attachment 8600

 

[Dave B]

I have a few unger s channels in the shed

All modded though

 

[HALTON]

I was told the clips fit unger channel?

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

I wouldn't even bother mate

The liquidator channels are great and wider from front to back which works with the clips

They were designed together and i doubt you'll bodge them effectively on other channels

Imo unger channels are too thin front to back anyway which is why most of my modded channels are ettore as less rubber shows at the front of the channel

 

[HALTON]

So what size u got on your belt how are the two smaller ones held on and why two pockets what you got in them ?

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

What's this the spanish inquisition :rofl:

14" 18" in boab

10" 5.5" in unger holster

22" goes in boab if needed and i can lose the small one from the holster to make room for the 14"

Bottle of soap in left pouch front as i only use water in the bucket

Sill cloths in left pouch back

Mobile in front velcro bit

Scraper and magic sponge right pouch front

Microfibre glass cloth (very rarely used) right pouch back

Lots of cash in front velcro bit lol

The pouches go at the back when i wear it

 

[HALTON]

Cool so all moerman channels did you cut 10" down and is the 5.5" length including clips

Sorry for questions but enjoyed using it today didn't need to wash cloths after today

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

I cut any to size that i need including specific to certain windows that i do regularly

The 5.5 is just a guess i am not actually sure of the size it looks about 5.5

It is the width of the handle plus clips

 

[HALTON]

Cheers daveyboy I see you trad bottoms and squeegee top openers etc what if there leaded at bottoms do you just wfp them?

Sent using the Window Cleaning Forums mobile app

 

[Eric Gilliand]

If you're cutting down to make smaller you allow one inch per clip. So a 14" channel (actually 13.5) will measure 11.5 without the clips. When cutting down if you still want to use the 'guide dots' for handle positioning you take even amounts of each end...

 

[HALTON]

Cheers Eric will keep that in mind

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

Cheers daveyboy I see you trad bottoms and squeegee top openers etc what if there leaded at bottoms do you just wfp them?

Sent using the Window Cleaning Forums mobile app

This is me doing the dreaded leaded

Can be done easily trad like this but easier to wfp it

You tend to get leaded only on fronts round here so doesn't take long to trad just a few leadeds

[media]

[/media]

 

[HALTON]

Eric so if I buy a 10" would I be able to make a 6" and 8" cut channel at 4" with tips on 6"

6" channel left over after cutting it 6" + tips 8" ?

Is that correct

Sent using the Window Cleaning Forums mobile app

 

[HALTON]

This is me doing the dreaded leadedCan be done easily trad like this but easier to wfp it

You tend to get leaded only on fronts round here so doesn't take long to trad just a few leadeds

[media]

Cool video what microfibres you using are they the wintecs ocean ones

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

Wilko glass cleaning cloth £3 in wilko 60x80cm

 

[HALTON]

Thanks again for the help

Sent using the Window Cleaning Forums mobile app

 

[HALTON]

Guess you don't use wagtail flip on leaded anymore do you just use your applicator and moerman

Sent using the Window Cleaning Forums mobile app

 

[Eric Gilliand]

View attachment 8602 The problem you'll have is that if you have 4" you'll have no room to fit a handle once you put the clips on... check my attached pic. Depending on the handles you use the smallest liquidator channel you'll be able to make is about 6.5 inches...

Eric so if I buy a 10" would I be able to make a 6" and 8" cut channel at 4" with tips on 6"6" channel left over after cutting it 6" + tips 8" ?

Is that correct

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

View attachment 12191 The problem you'll have is that if you have 4" you'll have no room to fit a handle once you put the clips on... check my attached pic. Depending on the handles you use the smallest liquidator channel you'll be able to make is about 6.5 inches...

That must be the size of mine then..only guessed at 5.5"

 

[HALTON]

Cheers so if I ordered a 10" v2 channel do I have to buy v2 clips as on wcw there v1

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

The channels come with the correct clips on them