Dead End Detection

Discussion in 'Water Fed Pole Cleaning' started by Tuffers, Apr 22, 2013.

Advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the UK Window Cleaning Forums.
    Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

  1. Tuffers

    Tuffers Hero
    Member

    Joined:
    Sep 10, 2012
    Messages:
    9,399
    Likes Received:
    2,747
    It's taking approx 11 seconds for the controller to figure out the flow has stopped.

    Do I up the calibration or lower it to get it more fine tuned?
     
    Advertisement
  2. Brightsure

    Brightsure Active Member
    Member

    Joined:
    Feb 2, 2013
    Messages:
    157
    Likes Received:
    5
    You need to lower it, the higher the calibration the longer the pump will continue to gain pressure.
     
  3. OoO

    OoO Guest

    If you up it. It will take even longer to hit the pressure cut off.

    So drop it.

    What pump you got. Shurflo 5.1 L a min?

    What settings you on now?

    Make sure any leaks are sorted.
     
  4. Tuffers

    Tuffers Hero
    Member

    Joined:
    Sep 10, 2012
    Messages:
    9,399
    Likes Received:
    2,747
    Got it set on 15 I think. It was on 60. It's a Shurflo 5L p/m. Working fine now. Got some gas tape from a plumbers today that has sorted a couple of leaks. Still have one on the bodged elbow where I'm using a copper elbow.

    Not checked your pm yet Dammo, hope it's the cure!
     
  5. daz

    daz Guest

Advertisement