Double DI

[Corps012588]

Hiya guys. I've just taken delivery of my second di tank and just wanted to ask some advice.

When using one di vessel I would allow my tds to creep to 3 before throwing out the resin.

My tds is now at 3 as we speak.

Should I fill up my 2nd vessel with fresh resin now and connect it up or allow the first to reach a slightly higher tds first?

If it helps, my tds out of the tap reads around 47.

Sent using the Window Cleaning Forums mobile app

 

[♠Winp®oClean♠]

Just do it now as you're not saving anything by waiting any longer. Connect your new/fresh vessel after it so that it pre-filters the new resin and bob's ya uncle.[emoji106]

Sent using the Window Cleaning Forums mobile app

 

[Dave B]

I would let it get up to a level that you know it will start spotting if any higher

Where i am i would let it get to 11 ish knowing it won't spot if i was di only

Then swap and only change the resin when it reaches the same as your tap water or the second one reads too high

 

[Dan Paton]

Put the current vessel ( with the tds of 3) nearest the tap and your new vessel with new resin furthest from the tap.


Sent from my iPhone using Window Cleaning Forums

 

[Corps012588]

Thank you for such quick replies chaps. I will be carrying both on the van as I deionise as I work.
Can't wait to see if I actually save much

Sent using the Window Cleaning Forums mobile app