What fittings

[Alex87]

Hi all

What fitting should I use to connect to the di vessel. I Bought some cheap ones from bnq but they are leaking when under pressure.

Should I use Hozelock ?

 

[Tuffers]

Hi all
What fitting should I use to connect to the di vessel. I Bought some cheap ones from bnq but they are leaking when under pressure.

Should I use Hozelock ?

You bought B&Q hozelock fittings? I use them and find them ok. The leak out of your vessel could be from the male Hozelock that screws in the thread on the DI?

 

[mark]

undo the male thread on the di & put some ptfe tape around the thread & tighten it with an adjustable wrench.also have you got the hose the right way around.water in- water out?.is the resin compacted too much,the water needs to circulate?which will cause pressure.if not all these, its the connectors

 

[Alex87]

Thanks for the reply will have a play about with all this now and see what's what.

 

[Alex87]

Sorted. It was the fitting on the di. Just replaced them with my bnq ones ptfe tape and away I go.

Thanks