Fliq Clips

Discussion in 'Traditional Window Cleaning' started by stevethewindowcleaner, Oct 6, 2016.

Advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the UK Window Cleaning Forums.
    Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

  1. stevethewindowcleaner

    Member

    Joined:
    Feb 26, 2014
    Messages:
    26
    Likes Received:
    3
    How do you get them on to the channel?
    The end clips don't seem to want to come off and I didn't want to force it if I wasn't supposed to.
     
    Advertisement
  2. daveyboy

    daveyboy Legend
    Moderator

    Joined:
    Jul 10, 2014
    Messages:
    13,039
    Likes Received:
    4,696
    Push them on over the channel and then make sure the tab drops into the cut out next to the liquidator clip
     
    • Informative Informative x 1
    • List
  3. daveyboy

    daveyboy Legend
    Moderator

    Joined:
    Jul 10, 2014
    Messages:
    13,039
    Likes Received:
    4,696
    The clips will come off if you lever the edge where the cutout is on the channel and then pull them off but i found there was no need
     
    • Informative Informative x 1
    • List
  4. Eric Gilliand

    Eric Gilliand Well-Known Member
    Member

    Joined:
    Apr 27, 2014
    Messages:
    575
    Likes Received:
    338
    If your clips are on really tight put a small flat blade screwdriver under it at the groove in the channel, raise up slightly and then push on the clip with your other hand. Once it's cleared the groove it will then slide off.
     
Advertisement