Cottonlung
Well-known member
- Messages
- 176
- Location
- Manchester
Can anybody recommend as storage shed that will house a 1000ltr ibc tank that I can insulate.. cheaper the better? Not got alot of room for a normal garden shed. Cheers
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Nice info.. do you have a picture so I can get an idea?I'd seriously consider building your own, especially if space is tight. It's not difficult.
My tank is 1200mm long, 1000mm front to back, and about 1200mm in height at a guess. My shed is about 2000mm long, 1400mm front to back, 1800mm in height, with a lean-to roof. It needs to be big enough to hold the processing equipment in one end and the transfer hose in the other end nearer the van. I'd make it slightly longer if I was doing it again for more elbow room when changing filters etc and to allow a bit more storage. Insulate well, especially the processing system.
I'll try to remember to take a photo on Monday. It's at a buddy's house as I was in a rented house when I started after coming back from living in Ireland.Nice info.. do you have a picture so I can get an idea?
Much appreciated budI'll try to remember to take a photo on Monday. It's at a buddy's house as I was in a rented house when I started after coming back from living in Ireland.
Thanks for the info. I'll look into it ?Surely any decent shed supplier/builder would be able to build you one to spec, down my allotment one of the previous holders built one out of 3x2 and osb board and it's pretty decent, what I would say is if it's going in a garden get a proper base put down with flagstones I have seen a few of my clients put there sheds straight on grass or gravel they will end up been replaced looking at the state of them and they are less than 12 months old they are also the really cheap timber sheds
It's a bit rough and ready. My buddy knocked it up while I was working and it does the job the finest. The size is pretty spot on other than it could be a little bit longer.That gives me an idea of the kind of setup I need. Thanks mate
It's does what it's meant to that's the main thing palIt's a bit rough and ready. My buddy knocked it up while I was working and it does the job the finest. The size is pretty spot on other than it could be a little bit longer.