Installation for waterfed systems

[waterflow18]

HI all, 

Any recommendations for someone or a company in the Kent area to help me reinstall my waterfed system. install a pump to a battery and the control box etc. I appreciate this a very simple task for a lot of you who are experienced, unfortunately my system I've been using up until this date is a total mess with wires all over the place. Would a simple local electrician be upto the task. 

Many Thanks 

 

[Green Pro Clean Ltd]

Yes.  It is quite straight forward amd a search on youtube on how to wire it should sort you out.  I am a mechanical / electrical lost cause and I managed it. 

 

[waterflow18]

Yeah thats one piece of the puzzle, I'm thinking I might have some sort of water air flow issues. Was out working when the pressure starting to cut off, this has happened before which is normally down to dirty or a blocked filter.  Unfortunately not this time, the pumped seemed to work fine with good flow when the hose wasn't connected to the hose reel, so I changed over the reel to a shorter length and with the pressure turned up seem to set itself Ok again, I kept on for 10mins yesterday and looked Ok. However today I've had no joy even when disconnecting from the hose reel itself, the pump would just stop and start. I've order a new pump at the advise of another window cleaner to see if i can eliminate the problem. I will hook up a new pump tomorrow and sort out the crazy wiring in hope that good be it. Would be much quicker if someone who is fair more experienced with installations for waterfed systems as the pump might not be the issue. 

Many thanks 

 

[spruce]

Yeah thats one piece of the puzzle, I'm thinking I might have some sort of water air flow issues. Was out working when the pressure starting to cut off, this has happened before which is normally down to dirty or a blocked filter.  Unfortunately not this time, the pumped seemed to work fine with good flow when the hose wasn't connected to the hose reel, so I changed over the reel to a shorter length and with the pressure turned up seem to set itself Ok again, I kept on for 10mins yesterday and looked Ok. However today I've had no joy even when disconnecting from the hose reel itself, the pump would just stop and start. I've order a new pump at the advise of another window cleaner to see if i can eliminate the problem. I will hook up a new pump tomorrow and sort out the crazy wiring in hope that good be it. Would be much quicker if someone who is fair more experienced with installations for waterfed systems as the pump might not be the issue. 

Many thanks 

What controller do you have? If its a Spring controller (or rebadged variants) or a Varistream it will probably need recalibrating.

 

[waterflow18]

Thanks guys for your input. New pump did the trick and now back in the game. 

many thanks