Internal Di Vessel Workings?

Discussion in 'Water Fed Pole Cleaning' started by keir, Apr 9, 2013.

Advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the UK Window Cleaning Forums.
    Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

  1. keir

    keir Guru
    Member

    Joined:
    Jan 12, 2013
    Messages:
    1,029
    Likes Received:
    237
    Need some advice off you experienced lads, just changed resin on one of my vessels and noticed that on the shaft that drives into the resin there's 2 cup shaped plastic things one at the top one for the bottom.

    The one at the top is for water in and the bottom one is for water out? Am I correct up to now?

    The top one for water in, on mine has come unstuck! I presumes their only glued in place?

    Will this affect its job? And can I just use araldite or similar epoxy glue.

    Thanks lads
     
    Advertisement
  2. Newbie123

    Newbie123 Forum Addict
    Member

    Joined:
    Jan 3, 2013
    Messages:
    679
    Likes Received:
    16
    Mine as come off once but just clicked back on with some gently persuasion
     
  3. JDMW

    JDMW Guru
    Member

    Joined:
    Jan 6, 2013
    Messages:
    1,182
    Likes Received:
    21
    yeh i filled my 11L vessel up for the first time ever since having it 2 years. i harvest rain water so using this will help give me 000 ppm. my tube thing comes out and the top thing comes apart, i have white stuff but it still gives me 000 so im happy :D
     
  4. Ade

    Ade Member
    Member

    Joined:
    Feb 28, 2013
    Messages:
    27
    Likes Received:
    0
    mine came out too, just pushed it back up and all seems good
    was advised to glue it but never got round to it, still works fine though
     
  5. JDMW

    JDMW Guru
    Member

    Joined:
    Jan 6, 2013
    Messages:
    1,182
    Likes Received:
    21
    i pulled my tube out, couldnt see how to fill it up i filled it with resin then realised i couldnt push the tube to the bottom so i pulled it off stuck some rag in the tube so the resin didnt go down it and used a cup and filled it up then put the lid on. worked ok for me. thing i did notice was after the pumps shut off i got loads of pressure in the di and i can still clean upto 4 windows from the pressure :Image3big: :Image3:
     
Advertisement