Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Dead End Detection

Tuffers

Well-known member
Messages
10,919
Location
\_( ' ; ' )_/
It's taking approx 11 seconds for the controller to figure out the flow has stopped.

Do I up the calibration or lower it to get it more fine tuned?

 
It's taking approx 11 seconds for the controller to figure out the flow has stopped.

Do I up the calibration or lower it to get it more fine tuned?
You need to lower it, the higher the calibration the longer the pump will continue to gain pressure.
 
If you up it. It will take even longer to hit the pressure cut off.

So drop it.

What pump you got. Shurflo 5.1 L a min?

What settings you on now?

Make sure any leaks are sorted.

 
Got it set on 15 I think. It was on 60. It's a Shurflo 5L p/m. Working fine now. Got some gas tape from a plumbers today that has sorted a couple of leaks. Still have one on the bodged elbow where I'm using a copper elbow.

Not checked your pm yet Dammo, hope it's the cure!

 
Back
Top