pure from holding tank to van tank and tds

[ks789]

hi all,  just for some views here. Probably obvious but handy to know of any experience or views.

For transfer of pure from holding tank to van tank got some  1/2 inch hose that was knocking about. could it mess up the tds of the pure using this. I know ideally everything brand new, but if I pumped it through with water and wash it etc should it be fine? prob being a bit paranoid but you know how the pure can change, and apologies for a boring question but you are the ones who know. you are, the 4th emergency service! :1f44d: :1f44d:

 

[Part Timer]

Run a test on it before you clean it out. Then test it again after. If the TDS is up pre clean and then ok you will be fine. Just run a test every now and again to ensure its not breaking down 

 

[ks789]

yeh will do, cheers bud. this old camping container we got. seems clean enough but had some pure in it and tds just creeps up in it. pures fine in the holding butts. Biologists, physicists, mechanics, AS WELL AS window cleaners. The nations finest. :1f44f: :1f44f: