New Membrane Needed

Discussion in 'Water Fed Pole Cleaning' started by dave83, Jul 11, 2016.

Advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the UK Window Cleaning Forums.
    Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

  1. dave83

    dave83 Member
    Member

    Joined:
    Mar 2, 2014
    Messages:
    89
    Likes Received:
    32
    Done a reading today as i am starting to use a lot of resin.
    Feed Water 236, reading off the membrane 38.
    I do use 3 resin chambers so that i exhaust all of the resin so i know i am getting good water.
    Which 4040 membranes is everyone using?
    I'm currently using the one from vyair below, i can get 2 litres a minute at a ratio of 3:1 pure, can get 2.5 litre per minute if i push it and the weather is warmer.
    ECO4-4040 Ultra Low Pressure Membrane - Vyair (UK) Ltd
     
    Advertisement
  2. spruce

    spruce Grand Master
    Member

    Joined:
    Jun 4, 2012
    Messages:
    2,536
    Likes Received:
    736
    #2 spruce, Jul 12, 2016
    Last edited: Jul 12, 2016
    AXEON HF5 4040 40" RO Membrane - RO Housings, Membranes etc. - Water Treatment - Pure Water Systems - All Products Gardiner Pole Systems

    For me the most important thing is that they are made in the USA and not in Asia. RoMan once advised that the Chinese membranes were cheaper but didn't perform. The Americans have been using and manufacturing membranes for years so KNOW how to make them.

    I do use 3 resin chambers so that i exhaust all of the resin so i know i am getting good water.
    I'm not sure what you mean by that tbh. Once the resin is spent then the water quality drops off. I understand the principle of double di, but that's practiced to eek out the last from each vessel of resin.

    How old is the membrane and how often do you change prefilters?

    What prefilters do you use?

    What are the sizes of your prefilters, ie 10" or 20" housings?

    -
     
Advertisement