TWC
Well-known member
- Messages
- 342
- Location
- Northampton
Morning allView attachment 4488
Replacing a switch with a flow master controller and just want to check before I damage something. Here's the wiring diagram supplied but currently my live wire (after the switch) goes to the pressure switch then to the positive on the bottom of the pump. Should I just plug the black/white wire to the pressure switch or remove the wiring to the pressure switch altogether. Thanks in advance for any help
Replacing a switch with a flow master controller and just want to check before I damage something. Here's the wiring diagram supplied but currently my live wire (after the switch) goes to the pressure switch then to the positive on the bottom of the pump. Should I just plug the black/white wire to the pressure switch or remove the wiring to the pressure switch altogether. Thanks in advance for any help