AW Services
Well-known member
- Messages
- 4,015
- Location
- Devon
Good morning all,
Thought I'd share another top tip and great way to store your pressure washer guns / lances
In the past I've just put them inside my wheelie bin but noticed the standard gun & turbo nozzle lance would pick up grit etc.
With a new van and build I made a nice tidy gun holder using two lengths of steel channel riveted to the bulkhead and two lengths of 68mm FloPlast downpipe secured with clamps
Both guns slide easily into their respective tubes and don't fall as I used a Tesco Basics white chopping board and cut it into a 50mm wide by 300mm rectangle and cut at 16mm slot down the middle which pushed down over both lance ends securing them into the tubes
Thought I'd share another top tip and great way to store your pressure washer guns / lances
In the past I've just put them inside my wheelie bin but noticed the standard gun & turbo nozzle lance would pick up grit etc.
With a new van and build I made a nice tidy gun holder using two lengths of steel channel riveted to the bulkhead and two lengths of 68mm FloPlast downpipe secured with clamps
Both guns slide easily into their respective tubes and don't fall as I used a Tesco Basics white chopping board and cut it into a 50mm wide by 300mm rectangle and cut at 16mm slot down the middle which pushed down over both lance ends securing them into the tubes
