Section 1 SLX - Section 1 issue

[THL4KEL]

My section 1 has for a long time needed a strip of tape to be able to clamp it as it has worn down.

The tape nolonger works I need to lacquer it, the clamp just scapes of the tape now.

Does anyone have any recommendation for a decent lacquer?

Cheers THL

 

[Alex Gardiner]

What will work better than lacquer is a thin application of Epoxy resin. If you mix up a small amount and then very thinly spread it on the needed area. When dry sand off any high spots.

https://www.amazon.co.uk/Araldite®-Rapid-24ml-Syringe-Epoxy/dp/B006JYPNUI/ref=sr_1_1_sspa?hvadid=80745417210401&hvbmt=be&hvdev=c&hvqmt=e&keywords=araldite+rapid&qid=1564148580&s=gateway&sr=8-1-spons&psc=1

 

[brianbadonde]

I applied the stuff Alex suggested maybe 8 months ago or so and it worked a treat. Haven’t needed to use any more since then.

 

[THL4KEL]

Cheers Alex 

 

[spruce]

Alex did a video on this a number of years ago @THL4KEL