Tds Readings

[Fizzy150]

i have a 000 reading when the water comes out off the my di put when i put a hose on the end to fill up my van it reads at 13 can any one give me a hit on how to stop this?

 

[rcproperty]

Could be a contaminated hose, have you used the hose with pure water before?

 

[Fizzy150]

no is there any way off cleaning it out if not whats the best one to use

 

[rcproperty]

Could try running pure water through it for a few litres then stop running water through it but keep water in the hose let the inside soak for a bit then empty it and repeat again and see what reading you get after that.

 

[Shaun1977]

I had same problem bit back I let the water run threw the hose for bit to clear hose out before connecting it to fill tank

 

[daley]

run it till it drips ,and did u use for suert els

 

[Fizzy150]

thanxs lads i will try some off them then get back to u

 

[rcproperty]

Let's hope it works for u

 

[Smurf]

Trust me It works as I been using a standard garden hose used from an outside tap to water plants (tds 345 ppm). Then I’ve used the same hose to transfer pure to me van tank by connecting it to me holding tank pump. I just flushed it through with pure until the tds drops to 000 ppm before filling the tank etc. Simples....