Tds

Discussion in 'Water Fed Pole Cleaning' started by Pepe, Oct 1, 2013.

Advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the UK Window Cleaning Forums.
    Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

  1. Pepe

    Pepe Member
    Member

    Joined:
    Aug 20, 2013
    Messages:
    30
    Likes Received:
    0
    Only getting 003 reading on ro system . Is this ok to clean windows?.all new system one week old have resin vessel connected to ro. Just bought from pure freedom.
     
    Advertisement
  2. nwcs

    nwcs Forum Addict
    Member

    Joined:
    Jan 19, 2013
    Messages:
    742
    Likes Received:
    29
    Yes should be fine.

    But really it should be 000ppm

    Did you flush it for an hour before making water.

    Whats your tap ppm ?
     
  3. Pepe

    Pepe Member
    Member

    Joined:
    Aug 20, 2013
    Messages:
    30
    Likes Received:
    0
    Tap readiing is 400 yes did flush
     
  4. nwcs

    nwcs Forum Addict
    Member

    Joined:
    Jan 19, 2013
    Messages:
    742
    Likes Received:
    29
    Pass then. Mines only 150

    Is the resin chamber in right and screwed up tight.

    Give purefreedom a ring. They've always been very helpful with me
     
  5. Eclipse

    Eclipse Well-Known Member
    Member

    Joined:
    Aug 18, 2013
    Messages:
    572
    Likes Received:
    67
    It will be fine, I won't use anything more than 1ppm though.
     
  6. mark m

    mark m Hero
    Member

    Joined:
    Feb 22, 2012
    Messages:
    6,621
    Likes Received:
    527
    003 will be fine I have a couple of tds meters and sometimes they can be 2 or 3 out
     
  7. tench0771

    tench0771 Grand Master
    Member

    Joined:
    Jun 30, 2013
    Messages:
    4,278
    Likes Received:
    932
    u can clean with 003 no prob,my m8 got a twni di set up frm pure freedom at thurst water was comeing out a 006 after 4 or 5 25l drums it was 003 now its ooo so may just need a bit of time to setel? ide dubble check every thing is scrud on proply an the pipes rnt conected rong maby ring pure freedom there good as gold shore they will steer u in the rite direction :Image13:
     
  8. tonylephard

    tonylephard Member
    Member

    Joined:
    Aug 12, 2013
    Messages:
    27
    Likes Received:
    0
    we clean with 002 but cleaned with 004 yesterday and the windows dried fine. That being the case you should be able to produce 000 with this set up. According to Ionics they can produce 000000 with their new setup. Makes me wonder why you would need that if 000 leaves no spots??
     
  9. Pride Clean

    Pride Clean Active Member
    Member

    Joined:
    Mar 22, 2013
    Messages:
    116
    Likes Received:
    10
    I'm assuming you have a 10'' resin vessel after r.o?
    When you flushed it did you keep your resin connected?when ever you flush your r.o ALWAYS disconnect your d.i otherwise you'll spank through resin which maybe why your tds isnt 000....
     
  10. Pepe

    Pepe Member
    Member

    Joined:
    Aug 20, 2013
    Messages:
    30
    Likes Received:
    0
    No I didn't disconnect my resin vessel when I did a flush didn't know u had to . Will do that thanks.
     
Advertisement