Tubeless help

Discussion in 'Water Fed Pole Cleaning' started by CHWS, Mar 10, 2016.

Advertisement
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome to the UK Window Cleaning Forums.
    Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

  1. CHWS

    CHWS Forum Addict
    Member

    Joined:
    Jan 13, 2013
    Messages:
    999
    Likes Received:
    188
    Right my head is turned with this tubeless conversion, I've followed Steve's steps to where the rectus fitting is supposed to just be at the end of First section, I then put it into my pole and it's too far up the pole for the sleeve to connect into????

    Please help
     
    Advertisement
  2. mark

    mark Forum Addict
    Member

    Joined:
    Sep 26, 2014
    Messages:
    708
    Likes Received:
    180
    did you buy the pole spacer?if not don't worry you can use insulation tape!!!the male rectus fitting should be about 1inch up the pole on the 1st section.
     
  3. CHWS

    CHWS Forum Addict
    Member

    Joined:
    Jan 13, 2013
    Messages:
    999
    Likes Received:
    188
    Yes I bought the kit I'll show you pics of where I'm at
     
  4. CHWS

    CHWS Forum Addict
    Member

    Joined:
    Jan 13, 2013
    Messages:
    999
    Likes Received:
    188
    14576369717251328980549.jpg 1457637013132-118247121.jpg and it's not coming out the bottom it's about 4 inches and that's not the rectus where it should be
     
  5. CHWS

    CHWS Forum Addict
    Member

    Joined:
    Jan 13, 2013
    Messages:
    999
    Likes Received:
    188
    I have an extension 6 on my pole and when I take it off its hanging out
     
  6. mark

    mark Forum Addict
    Member

    Joined:
    Sep 26, 2014
    Messages:
    708
    Likes Received:
    180
    its a simple fix.did you get the pole bung??with it
     
  7. CHWS

    CHWS Forum Addict
    Member

    Joined:
    Jan 13, 2013
    Messages:
    999
    Likes Received:
    188
  8. tlwcs

    tlwcs Guest

    Go onto his website, there is a good vid showing step by step
     
  9. CHWS

    CHWS Forum Addict
    Member

    Joined:
    Jan 13, 2013
    Messages:
    999
    Likes Received:
    188
    I've watched the video but it's because my extension 6 is longer than the the rest of the sections
     
  10. CHWS

    CHWS Forum Addict
    Member

    Joined:
    Jan 13, 2013
    Messages:
    999
    Likes Received:
    188
    Is it just going to be a case of pulling down more hose and just connecting the ejector with the hose actually hanging out?
     
Advertisement