Univalve O ring Lubrication

[Poles Apart]

Hi, tried to contact Steve Jones on facebook but he's gone, want to lube the o ring but don't know how you take the valve apart? 

 

[J and S]

I did it with difficulty....you need to pinch the two pins in and pull at the same time.....you'll know what I mean because there is nothing else to see that could be used to open it uo.

 

[CMcB]

Pulling it apart was way easier than I expected once I found out how to do it. I'll see if I can explain it.....

I've attached a picture

Use a pair of pliers and squeeze on the black bit of the univalve shown, make sure the jaws are in line with the pins. Then its should just pull off. 

Let me know if it works! 

 

[spruce]

I did it with difficulty....you need to pinch the two pins in and pull at the same time.....you'll know what I mean because there is nothing else to see that could be used to open it uo.

Hi, tried to contact Steve Jones on facebook but he's gone, want to lube the o ring but don't know how you take the valve apart? 

Steve put a video up on YouTube and then took it down.

He's a 'counterfeit' copy of Steve's video that should help you.

 

[Poles Apart]

Thanks, I'll just replace the valve.