AW Services
Well-known member
- Messages
- 4,013
- Location
- Devon
Okay, so you have an open circuit on the output side of the controller because the hypothetical (switch) the green flow controller start stop is open.Hi Austin
Thanks for the reply mate.
I'm not getting any voltage on the pump side of the flow controller, but getting 12 plus on the input side of it so there's power to it but not out, the led is turned right up till 100. Can the flow controller be by passed by joining the positive feed and output and negative cables up ?
Can you isolate the connection from the flow controller green switch to the wireless relay and test the controller again just as it was new