tap for water fed pole facelift big boy

Hi guy

I have a facelift big boy back pack but use it a a trolley system .

I have bought a tap from window cleaning warehouse .

But the 8 mm pipe was too short so have just bought some more 30 mtr. Of it .

Problem I have now is I need a rectus fitting to fit the pole pipe . Not from tank pole end

Picture is from my trolley to tap until I change the 8 mm pipe so I can have it in my hand not keep havnt to go back to the machine

View attachment 4244

Not sure I'm understanding your post. But here's a link to a male 8mm Rectus 21 fitting. http://www.ebay.co.uk/itm/Still-The-BESTWFP-Microbore-Type-Water-Fed-Pole-RECTUS-21-Probe-x-8mm-Hose-Tail-/151653257295?pt=LH_DefaultDomain_3&hash=item234f3d104f

Hi Tuffers

The tap is connect to 8 mm pipe 5 mm inner but I need a male connector to fit the thin pole hose that goes right up to the brush .

Hi TuffersThe tap is connect to 8 mm pipe 5 mm inner but I need a male connector to fit the thin pole hose that goes right up to the brush .

Click to expand...

Sounds like you need this one then http://www.ebay.co.uk/itm/THE-BEST-WFP-Microbore-Type-Water-Fed-Pole-RECTUS-21-Probe-x-6mm-Hose-Tail-/151653257242?pt=LH_DefaultDomain_3&hash=item234f3d101a

So will this fit the hose you get with your pole Tuffers ?

6mm for your pole hose 8mm for reel hose if 8m reel, warm it up in hot water before fitting, dont forget to put locking o ring on first, i keep forgetting.

i got a tap from wintecs to put onto my backpack, + posting = £5+ same tap as you got, big saving from £14+

Think I am sorted now johnny thanks for your help though /emoticons/smile.png