Jump to content
mark

mounting a controller

Recommended Posts

mark

ive bought a safe flow controller.ive opened the front but there are that many wires and electrics inside(not like my others)I was going to use self tappers too secure through the inside,but theres literally not enough room to even get a screw driver through.umm!!!any idears?i could drill through the outside casing and use 2 x L BRACKETS to secure it,any idears?

Share this post


Link to post
Guest Hunty

Have u got a pic?

 

 

Sent from my iPhone using Window Cleaning Forums mobile app

Share this post


Link to post
spruce

You could use get a piece of plate that is a little wider than the controller and drill 4 mounting holes in each at each corner. Paint it unless its stainless and Galvanized. Then stick the controller onto the plate using double sided tape. As the plate is wider than the controller, the mounting screws can be got at from the outside (without opening the controller.)

Share this post


Link to post
peter rogers

Contact peter he. Will know. Or u cud put to long screws under it to holdit up then 2 tight bove it. Then that hold it in tight. V

Share this post


Link to post
mark

umm some good idears fellas,thanks for replies.might email mark munro aswell,he uses the safe flow controllers

Share this post


Link to post
AGlassAct

I brought a pure freedom trolley that needed a refurb - the controller was held on with a silicone type adhesive, I kid you not I bent a screwdriver trying to prise the damn thing off.

 

 

Sent from my iPhone using Window Cleaning Forums mobile app

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.