Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
You might find that the adjustable head isn't up to much. It clogs up the more you adjust it to get a tighter angle. A car radiator hose is better as it won't kink like the one supplied. The tools are ok ish, I got a dinner fork stuck to one section when I bought from them. My vac is the same as yours but it's called a Viper. Be careful with the plastic parts that hold the float, I broke mine off and I hadn't dropped it or owt. It also sucks better with the filter out, not that that is recommended.Also the vacum is a generic Chinese made vac not a Nilfisk as on the web. This is not a bad thing a lot of other systems use the same vac and charge lots more. 3 switches one for each 1000W motor. The adjustable head is simple but so handy. Again some other companies use car radiator hose.
You might find that the adjustable head isn't up to much. It clogs up the more you adjust it to get a tighter angle. A car radiator hose is better as it won't kink like the one supplied. The tools are ok ish, I got a dinner fork stuck to one section when I bought from them. My vac is the same as yours but it's called a Viper. Be careful with the plastic parts that hold the float, I broke mine off and I hadn't dropped it or owt. It also sucks better with the filter out, not that that is recommended.Also the vacum is a generic Chinese made vac not a Nilfisk as on the web. This is not a bad thing a lot of other systems use the same vac and charge lots more. 3 switches one for each 1000W motor. The adjustable head is simple but so handy. Again some other companies use car radiator hose.
Yep agree with what you say mate. Don't think you would want to go tighter than 180 degrees it would be more the case of going straighter EG when working over a conny. Could always replace the hose with silicone and have the best of both worlds.You might find that the adjustable head isn't up to much. It clogs up the more you adjust it to get a tighter angle. A car radiator hose is better as it won't kink like the one supplied. The tools are ok ish, I got a dinner fork stuck to one section when I bought from them. My vac is the same as yours but it's called a Viper. Be careful with the plastic parts that hold the float, I broke mine off and I hadn't dropped it or owt. It also sucks better with the filter out, not that that is recommended.
No. I was told by Alex it is no longer a Nilfisk. Not lesser quality ether where do you think the Nilfisk is made? Yep the same factory in china.I'm sorry to say, but if I had purchased something and was sent something of less quality I would be sending it back, not accepting it!
One of the few companies that have 100% carbon fibre poles made in England. Not 30% carbon fibre like some. Yep it is still basically a dinner fork but it looks handy to lift out bigger weeds.And Tuffers, a dinner fork sounds high tech,,:rofl: thought GCS where one of the best gutter vac companies, going by what I've just heard here I'm having real doubts!!!
Yep I ordered the camera with 5" viewer and SD card with mine.I have bought and used the GCS 1800 25ft carbon poles kit. Its the dogs danglies....only thing I dont rate is the mirror....to small.