4021 champ filter

Hi all,was after info for the inlet and outlet ports on champ housing please?

Waste is on the side as far as I'm aware,but is inlet on same end as waste?

Sent using the Window Cleaning Forums mobile app

monkeyman12 said:

Hi all,was after info for the inlet and outlet ports on champ housing please?

Waste is on the side as far as I'm aware,but is inlet on same end as waste?

Sent using the Window Cleaning Forums mobile app

Click to expand...

No. The inlet is on the side with a single port. The waste is at the opposite end, also at the side. The pure outlet port is in exactly the center on the same housing.

Thanks Spruce. What I can't figure out,unless I'm being a thicko,is why the flow arrow is pointing up from the end with the two ports,making it look like inlet is at centre port,and outlet is at top side port??



Sent using the Window Cleaning Forums mobile app

That's wrong. I would open the end with the single port to ensure the membrane is fitted correctly.

Attached are fitting instructions which apply to both the 4021 and 4040.

View attachment rokit.pdf

View attachment Snap ring A O Ring installation.pdf

Thanks very much for that info. I don't know why they don't stamp them inlet/waste/pure. Would save some ball ache.

I bought the housing second hand from ebay.  I wasn't expecting a membrane to be in it,but there was one included. Not sure if it's any good still. 

I made sure that I put it back in,the same way when I opened it,but didn't take note of flow direction. I'll crack it open,and take another look. ? 

Ah just figured it out! The end caps are on the wrong way around! But that's how it arrived. Very odd! ?

Sent using the Window Cleaning Forums mobile app