Jump to content

Don't want to see ads? Become a subscribed member.

Soffit with endless vents


Dabber

Recommended Posts

Hi all

Did my first gutter clearance along with fascia and soffit clean.Soffit was full of vents which caused me numerous problems.Whats the best way to deal with this.Was a three bed semi and probably undercharged at £60 but as I'm new to this game it's a good learning experience.

Link to comment

If you did it with WFP I would wrap a wet cloth round the brush and occasionally turn water on. And yes you did undercharge, but not many jobs pay £20 an hour whilst training. 

  • Thanks 2
Link to comment

All the above info is bang on. Only bit i have to add is that if ur wfp f/s/g i set brush to fan jet and wander around the premises lightly coating fsg bit not letting the brush touch the surface. Then spray a ready mixed tfr over fsc then have a brew if custy is home. Then on with the brush still using fan jet pump running at 30 or tap only open a bit is using custys water. If using custys water once back over with pure fan or multi pencil. Any drips out the soffit vents will be minor so wrap a toweled micro fibre over brush head or on a harris then glide underside (as above soffit will be clean) working your way back to the van. Used to ladder and rub and polish facia back in the day.
If you want to leave a proper shine either try the new tfr going around or dip in a pre mixed pure with a dollop of car polish. Having a spare brush made with fan and pencil just for fsg is the way forward. Tried every way there is to speed up fsg and this works for me if you still want to leave them looking like youve been up there and rubbed them by hand. win win

Sent using the Window Cleaning Forums mobile app

Link to comment

with the awkward ones with vents that have dirty drips no matter what: 1st I wash it thoroughly, 2nd I come back to it after it's drained and dripped a while and run the brush with water off along it which removes the excess drips. 3rd I wrap a scrim around brush head like part timer :1f603: and go over it again.

Link to comment

All i do is give it a good scrub a couple of times and move on then come back after a bit a give it a rinse and do that a few more times and eventually the drips go. After I finish the job I go around and check it again and then worse case scenario I wrap the Microfibre around the brush and get the drip mark. (Rarely have to do that) I would of been 120 on that job.

Link to comment

Don't want to see ads? Become a subscribed member.


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Ad Blocker Detected

Please disable your ad blocker

Our forum relies on ads to pay for the servers and our time maintaining and running the forum.

Sadly running a forum like this is not free, and due to our popularity, we need servers that can handle the amount of traffic and resources our forum uses.

 

If you do not wish to see ads on our site, please consider supporting the forum with a membership subscription.

 

Accept