marc674
Well-known member
- Messages
- 190
- Location
- East sussex
I have a shurflow pump with a varistream digital control. Over the past few weeks the water flow at the brush head starts to slow down then stop for around 6 seconds before the flow starts again. I presume this is due to the water been colder this time of year ? The same happened last year and I resorted to using a old pump box in the colder months.
I have tried to adjust the flow and pressure settings to get a good steady flow but the best I can achieve is flow rate of 3 with pressure set at d to get a constant flow and this slows rinsing down a lot to the point the backpack is quicker ! I use 6mm microbore hose which has been shortened to 70 meters and helps a bit. Can anyone advise me what is causing this problem ? Also i understand these control units can be over sensitive so would a analogue control be any better ? Thanks
Sent using the Window Cleaning Forums mobile app
I have tried to adjust the flow and pressure settings to get a good steady flow but the best I can achieve is flow rate of 3 with pressure set at d to get a constant flow and this slows rinsing down a lot to the point the backpack is quicker ! I use 6mm microbore hose which has been shortened to 70 meters and helps a bit. Can anyone advise me what is causing this problem ? Also i understand these control units can be over sensitive so would a analogue control be any better ? Thanks
Sent using the Window Cleaning Forums mobile app