slippy
Active member
- Messages
- 840
- Location
- Bournemouth
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
ThxsIf you look to the left side of the reel you can see where they fit. However I don't think the bits you have will fit the reel you have. In all honesty your better off with a clove leaf type reel like what I use. All threads have ptfe tape on them before bits were tightened up. No leaks in nearly 3 years !
Sent using the http://Window Cleaning Forums mobile app
It got all twisted and the microbore kinked stopping water flow. I was told to use garden hose with the ties to stop this and it works. However, get lots of leaksI don’t understand what the 2 extra hoselock fittings and piece of green hose are for? Why not connect the reel hose directly to the inlet and remove 2 potential leaks?
Do you just undo the make connector on outside by hand?Ok you don’t need that bit of hose pipe you’ve added between your microbore and hose reel.
Connect your new clamber aqua stop to the inner spindle but before you do. Unscrew that male connector off spindle. Feed spindle from inside of hose reel. Then when it pokes through the outside of your hose reel put your new 90 degree elbow on the outside.
Hope that makes sense.
Sent from my iPhone using Window Cleaning Forums
:1f602: :1f602:You do realise PTFE tape needs to be on the inside of the fitting, not taped around the outside like a bad bandage?
:1f602:
No disrespect if it ain't, But this has got to to be a wind up