brodex switch just blew

spruce said:

Brodex used to fit Varistream controllers and then they were fitting Spring controllers.
 
So yes, you can fit a single Spring controller. You can also fit a varistream controller as well.
 
This PCB actually looks like the replacement for a Varistream controller.
https://brodexbms.co.uk/product/single-digital-twin-speed-controller-pcb-switch/
 
But if you look at the system they are offering here, you will see that they have the Spring controller as part of the system
https://brodexbms.co.uk/product/e250di-pure-water-machine/
 
They also sell the controllers (both single and double) as spare parts on this page
https://brodexbms.co.uk/product-category/waterfed-accessories/machine-spares-parts-and-consumables/

Click to expand...

Aqua-pure Portadown said:

any of you guys know which wires go to the battery and pump ,2 black 2 red but numbered 1 to 4 ?

Sent from my SM-G930F using Tapatalk
 

Click to expand...

spruce said:

 
I think your best bet is to ask Spring controllers.
 
On the old Streamline Frostats No 1 was red and it was the main positive (+) feed from the battery and should have a 7.5 amp inline fuse.
No 2 was black and that was the return to the negative (-) of the battery.
No 3 was red and that was to the red (+) wire of the pump
No 4 was black and the negative (-) from the pump back to the controller.
 
But I would expect that your pump will be wired the same but I would check as I wouldn't take any responsibility if your controller is wired differently.
 
.

Click to expand...