What's the best way to clean out this gutter?

The thin attachment on my gutter vac will get down wider bits but not narrower bits.  I have a drain rod as well.  How do I clean this out? 

Applepicker said:

The thin attachment on my gutter vac will get down wider bits but not narrower bits.  I have a drain rod as well.  How do I clean this out? 
View attachment 14589

Click to expand...

You don’t [emoji23]


Sent from my iPhone using Window Cleaning Forums

I would blast it down one end with the garden hose with the vac running and suck it all up 

I 

Pjj said:

I would blast it down one end with the garden hose with the vac running and suck it all up 

Click to expand...

That's an idea.  Don't think a drain rod with scraper attachment would do it? 

Applepicker said:

I 

That's an idea.  Don't think a drain rod with scraper attachment would do it? 

Click to expand...

Yes might do  , we have done e few like this and just used the hose but there are probably several ways you could do it 

You might need to go up with a scaffold board to kneel on, conny roof struts will support you, and either pick or flush it out. If you're going to flush it just take end cap off gutter and put you're gutter vac bin under to save the mess.

If you can get the gutter end cap off then you may be able to get the drain rod in with the oval connector on it. The one that falls down when you drag it. You could then drag all the waste towards the bucket on the end.