Jump to content
H MAN

White scrubbing pads on Ettore scrubber T-Bar

Recommended Posts

H MAN
WHITE SCRUBBING PADS ON ETTORE SCRUBBER T BARS
Here we adapter white scrub pads 6 x 9 inch onto 18 inch Ettore T-Bar , could do this on other scrubbing T-bars as well and also DIY scrubber bars.
Can give you any size scrubber you like 4 inches through to 30 plus inches.
To get aggressive scrubbing power without scratching the surface.
 

Share this post


Link to post
rugbywolf

Very good Hman. You will probably find that the sponges will leave water along the frame which will mean you will have to wipe round. but otherwise, a good idea.

Share this post


Link to post
H MAN
6 hours ago, rugbywolf said:

Very good Hman. You will probably find that the sponges will leave water along the frame which will mean you will have to wipe round. but otherwise, a good idea.

 

This will only hold enough water to keep white scrubber material damp as the material does not hold that much water by it self. 

In video the excess sponge was just to show how thick it was that was cut flush with the ends.

The surfaces are  wetted by the  WINDOW WETTER LOOP TUBE WITH SPRAY NOZZLE which you see on the other scrubbers.

Which you see how to make one if you go to

Window Cleaning Tutorials & DIY

 

Share this post


Link to post


rugbywolf
14 hours ago, H MAN said:

 

This will only hold enough water to keep white scrubber material damp as the material does not hold that much water by it self. 

In video the excess sponge was just to show how thick it was that was cut flush with the ends.

The surfaces are  wetted by the  WINDOW WETTER LOOP TUBE WITH SPRAY NOZZLE which you see on the other scrubbers.

Which you see how to make one if you go to

Window Cleaning Tutorials & DIY

 

This is what I have on my 'Hybrid', only I don't have the sponge. The act of spreading the water around the glass is enough to get a bit of a lather. Of course, you're doing pole work, so I don't know if you can get as much action with that.

Share this post


Link to post
H MAN

Do a few videos showing how all the different scrubbers working by hand .

And here is a video did using the same spray nozzle on the pole.

Check it out.

 

 

Share this post


Link to post
Daniel Perkins

Are you pumping the pump spray bottle and the pressure of that comes out the jet? Wasn't sure if you had a trigger on washer at first.

Share this post


Link to post
H MAN
7 hours ago, Daniel Perkins said:

Are you pumping the pump spray bottle and the pressure of that comes out the jet? Wasn't sure if you had a trigger on washer at first.

That is correct this way you can use scrubber by hand when doing the two handed method.

But you can also use it on a pole like in the video above.:1f609::1f603:

Oh we have no trigger on the scrubber/washer just use the one on the pump spray bottle.

 

 

Edited by H MAN

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.