Jump to content
Welcome guest/lurker! Read more... ×
Download Our IOS and Android App! Read more... ×
Den

1.4mm jets water saving



Recommended Posts

Den

Seen difference of opinions with regards to jet sizes some for and some against I personally like the 100 degree fan jets over pencil jets on my 26cm brushes. I bought a 35cm extreme medium hybrid a while back and like it a lot it came with the standard 2mm jets I placed a order with Gardiner recently so added the 4 x 1.4mm pencil jets thought give them a try, only had a quick good with them today on my own house and they seem good pressure without whacking the flow up which what I was having to do being a 4 jetter.

 

@Alex Gardiner is their plans for a 35cm low pressure rinsebar ?

Share this post


Link to post
paul alan

I believe there is, I hope so anyway!

Share this post


Link to post
 
Marko067

When I purchased my 35cm brush I did the same.  Ordered 4x 1.4mm jets to spread the water out over the length of the brush. Sounded good in theory, but I found in practice I didn’t like them. Even at full pelt I didn’t seem to be able to get a good rinse. I’m getting better results with just 2x 100 degree fans. 

I love my 35cm Xtreme brush. Today I had to pop my 26cm brush on for a job so left it on for a bit. It was right odd, so small. Felt like I had a toothbrush on my pole.

 

Share this post


Link to post
Den
6 minutes ago, Marko067 said:

When I purchased my 35cm brush I did the same.  Ordered 4x 1.4mm jets to spread the water out over the length of the brush. Sounded good in theory, but I found in practice I didn’t like them. Even at full pelt I didn’t seem to be able to get a good rinse. I’m getting better results with just 2x 100 degree fans. 

I love my 35cm Xtreme brush. Today I had to pop my 26cm brush on for a job so left it on for a bit. It was right odd, so small. Felt like I had a toothbrush on my pole.

 

Weird isn’t it I normally use  the 35cm for the first 2 to 3 hours then swap to the 26cm DuPont extreme for the simple fact my son uses the 26cm DuPont for 5he first part of the day as we are both trialing the DuPont and seeing the longevity of that brush.

 

I love both brushes each time I change I prefer the One I have changed too if that makes senses Maybe just psylogical I don’t know 🙄

Share this post


Link to post
Alex Gardiner
13 hours ago, Den said:

 

 

@Alex Gardiner is their plans for a 35cm low pressure rinsebar ?

 

We are working on a 35cm rinsebar at this moment and it is in final testing phase.

 

It uses the same number of jets as the standard 26cm wide rinse-bar, but set at a 2° higher angle. This means that it is not low-pressure but with the water spread across a wider brush it sits somewhere between the two current rinse-bars for water pressure on the glass.

Share this post


Link to post
Den
11 minutes ago, Alex Gardiner said:

 

We are working on a 35cm rinsebar at this moment and it is in final testing phase.

 

It uses the same number of jets as the standard 26cm wide rinse-bar, but set at a 2° higher angle. This means that it is not low-pressure but with the water spread across a wider brush it sits somewhere between the two current rinse-bars for water pressure on the glass.

Brilliant Alex thanks for the speedy answer. 

Share this post


Link to post
Den
17 hours ago, Marko067 said:

When I purchased my 35cm brush I did the same.  Ordered 4x 1.4mm jets to spread the water out over the length of the brush. Sounded good in theory, but I found in practice I didn’t like them. Even at full pelt I didn’t seem to be able to get a good rinse. I’m getting better results with just 2x 100 degree fans. 

I love my 35cm Xtreme brush. Today I had to pop my 26cm brush on for a job so left it on for a bit. It was right odd, so small. Felt like I had a toothbrush on my pole.

 

My son feels the same with regards to pencil Jets he just done like them full stop.

Share this post


Link to post
THL4KEL

Iron Giant sorted me out with 1mm jets, have to say I wished Gardiners supplied them as an option on new brushes as they are really good and I use a lot less water using them. Great flow of water of them.

Share this post


Link to post
Iron Giant
2 hours ago, THL4KEL said:

Iron Giant sorted me out with 1mm jets, have to say I wished Gardiners supplied them as an option on new brushes as they are really good and I use a lot less water using them. Great flow of water of them.



I am a legendary  jet supplier/converter  🤣

Share this post


Link to post


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.