Jump to content
Paul Symonds

Spring Controller flow problem

Recommended Posts

Paul Symonds

Hi everyone, this is my first post so please be helpful 😊

I have had a spring controller V11 for a year or so now and all been fine. However today it started doing strange things. I'd normally work with it set at about 25 but it would randomly all off a sudden change itself to a higher flow rate up to the max 99. Sometimes I'd be able to use the button and bring that back down, other times the buttons wouldn't work and I'd have to turn the power off. This kept happening most the day. Sometimes it would just keep doing it, other times it would be ok for 20 minutes or so and then all of a sudden ramp up to 99 again. 

I have taken it all apart and check connections, all das seem OK. 

 

Any ideas what could be up with it? Thanks very much for any help. 

Share this post


Link to post
Pjj
15 minutes ago, Paul Symonds said:

Hi everyone, this is my first post so please be helpful 😊

I have had a spring controller V11 for a year or so now and all been fine. However today it started doing strange things. I'd normally work with it set at about 25 but it would randomly all off a sudden change itself to a higher flow rate up to the max 99. Sometimes I'd be able to use the button and bring that back down, other times the buttons wouldn't work and I'd have to turn the power off. This kept happening most the day. Sometimes it would just keep doing it, other times it would be ok for 20 minutes or so and then all of a sudden ramp up to 99 again. 

I have taken it all apart and check connections, all das seem OK. 

 

Any ideas what could be up with it? Thanks very much for any help. 

 

 

Give Ian Sheppard a call at spring controllers he is very helpful nice guy 

Share this post


Link to post
spruce
4 minutes ago, Pjj said:

 

 

Give Ian Sheppard a call at spring controllers he is very helpful nice guy 

 

Exactly what I would also suggest.

Heres his email address @Paul Symonds.

 

ian.sheppard@springltd.co

Edited by spruce

Share this post


Link to post


Iron Giant

Possibly not the answer but check you haven't put it on an auto setting, which is something I did by accident a few years ago, I had worked most of the day and only had 2 houses left to do halfway through a house the pressure dropped right off then stopped I was totally baffled so had to go home 15 minutes later I had sussed it and normal service was resumed.  

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.