Tds meter connections to small

Kemo said:

Hi, I bought a tds meter a while back off ebay and the connections are way to small, i need them to fit in to a hose pipe....any suggestions where i can get them from.

It the t that i need that you put the probe in with the 2 prongs on to get your reading.

thanks

Click to expand...

Jango said:

You don’t need to put them in a hose pipe. Get a clean mug, fill and rinse a few times with pure. Then fill the mug, put the TDS meter in and take the reading, the you have you ppm reading. ??

Click to expand...

Kemo said:

Sorry pal forgot to metion its an inline tds meter, the fitting is more for an ro system.

Same as the photo pal

View attachment 19903

Click to expand...

Kemo said:

Sorry pal forgot to metion its an inline tds meter, the fitting is more for an ro system.

Same as the photo pal

View attachment 19903

Click to expand...

spruce said:

You need to check the specs of the inline tds meter you bought.

If you want a Tee reducer 1/2" x 1/2" x 1/4" (1/4" the size of the probe - it could be 3/8") then Daqua sell them. But their shop is closed for another week.

https://www.daqua.co.uk/johnguest.htm

Murlock 1/2" x 1/2" x 1.4" Branch Push Fit Tee

JG hose tail underneath it.

!/2" x 1/2" x 3/8" are available from Gardiner site.

https://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/john-guest-fittings/1-2-fittings/john-guest-reducing-tee-a-to-3-8-outlet.html

https://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/john-guest-fittings/1-2-fittings/a-john-guest-stem-to-a-barb.html

Click to expand...

Kemo said:

Thanks sorted it now 

View attachment 19948

Click to expand...