Jump to content

D I Vessel problem


Recommended Posts

I changed my resin yesterday, when I took the vessel apart the basket type thing at the top which screws onto the lid had quite a lot of resin in, is this normal? It’s the first time I’ve done it hence the question. Many thanks in advance

Link to post

I would say no, but maybe depends on how fine your resin is to get through the little gaps.

Mine doesn't screw into the lid, it's just an interference, fit but tends to slip down a bit so I use a zip tie to help keep it in place.

Link to post
1 hour ago, Martyn said:

I would say no, but maybe depends on how fine your resin is to get through the little gaps.

Mine doesn't screw into the lid, it's just an interference, fit but tends to slip down a bit so I use a zip tie to help keep it in place.

Oh right I wonder if that is the problem with mine, it slipping down. The gaps are tiny, I use Tulson MB15 resin. Maybe I should unscrew it and take a look again. 

Link to post
8 hours ago, doug atkinson said:

At some time you will have connected the flow the wrong way. That’s the only way it will get in.

Ok thank you for that. That answers it, a friend of mine did it for me last time and did that, he realised after a few minutes and corrected it. So this is the first time I’ve done it myself, I rechecked it yesterday and no resin in. Many thanks. I too noticed the cable tie like Martin mentioned, made sure that was all ok too. I realised it just meets the lid, not screwed into the lid like I thought. 

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.