Welcome to the UK Window Cleaning Forums

Starting or own a window cleaning business? We're a network of window cleaners sharing advice, tips & experience. Rounds for sale & more. Join us today!

Unger Wfp, how to refit head?!

Ainsley

New member
Messages
5
Location
Suffolk
Hi guys ive managed to get a pole for cleaning but cannot seem to connect the head of the brush, any idea on how its done ive taken some pics but doesn't seem to be enough for the clips to grip see pics below. Any help would be great! 

IMG_20201023_112158_compress18.jpg

IMG_20201023_112203_compress15.jpg

 
Last edited by a moderator:
Hi guys ive managed to get a pole for cleaning but cannot seem to connect the head of the brush, any idea on how its done ive taken some pics but doesn't seem to be enough for the clips to grip see pics below. Any help would be great! 

View attachment 22168

View attachment 22169
You've ever over tightened the unger pole adapter with the Euro 22 thread and snapped it off or have the wrong parts 

It's not been assembled correctly 

 
Thanks for your speedy reply will have another go once the rain stops. All new to the system so were still figuring bits out. ☔?
From what it looks like your clamp has come off the pole end. That pole has most likely slid down into the other pole. Tip it upside down. Give it a good shake and it should slide out. 

Clean off the end. Remove the brush and whole head where the hose enters through the hole so you just have the clamp on the hose and push back on and tighten the Allen head bolt and reattach the brush head. Angle adapter etc

 
Will give it a try tomorrow, could well be a solution thanks for your time muchly appreciated. Will update you on the situation, this forum is a life saver! 

 
Back
Top