Pantri Trading
New member
- Messages
- 1
- Location
- Wales
Hi there. I have a used Karcher pressure washer like this one:-
https://www.kaercher.com/uk/professional/pressure-washers/cold-water-pressure-washers/special-class/hd-10-15-4-cage-food-13539080.html.
I can't see that it has any wrong direction protection for the motor. There's only an on and off switch, and a detergent metering control ****. No lights etc. How can I safely test the 3 phases are wired correctly? Is it safe to fill it up with water (there's a feed tank inside I believe), and briefly run it without the mains water connected, to see if water comes out of the high pressure connection? I have no other way of checking which way round the phases are.
Thanks for any help.
https://www.kaercher.com/uk/professional/pressure-washers/cold-water-pressure-washers/special-class/hd-10-15-4-cage-food-13539080.html.
I can't see that it has any wrong direction protection for the motor. There's only an on and off switch, and a detergent metering control ****. No lights etc. How can I safely test the 3 phases are wired correctly? Is it safe to fill it up with water (there's a feed tank inside I believe), and briefly run it without the mains water connected, to see if water comes out of the high pressure connection? I have no other way of checking which way round the phases are.
Thanks for any help.