Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Did wonder if I’m using enough tape should the base be screwed tight to tank or bit awayTry using just a simple elbow rather than the tap/valve thing you’re using. That might be the problem, worth a try.
Otherwise are you using plenty of Ptfe tape? You need plenty on, enough to make it difficult to screw-in but that’s what makes it seal.
I didn’t know it was still made. It was always great stuff, bet it would be good to glue the bumper on my brush?When you take it apart you also need to check that you haven't overtightened the fitting and cracked the female insert in the tank.
Rightly or wrongly, I have mixed up some Araldite before and 'painted' the mixture into the male threads. Just tighten the fitting enough to hold it securely and then leave the joint for a few hours for the glue to set hard. I've used this method on a couple of leaking mains pressure joints which are still good 7 years later.
I love Araldite.
https://www.screwfix.com/p/araldite-2-part-epoxy-adhesive-tubes-opaque-2-x-15ml/2457hI didn’t know it was still made. It was always great stuff, bet it would be good to glue the bumper on my brush?
Thanks that’s great I’ll get some. I like the idea of the brush bumper, just got it so I’ll get it stuck on first before use??