Follow along with the video below to see how to install our site as a web app on your home screen.
Note: this_feature_currently_requires_accessing_site_using_safari
Depends on the chemical and the temperature. A good general rule of thumb is not to let chemicals dry on UPVCI have been leaving it for no more than 5 min will it damage the upvc if I leave it too long
Ok I will leave it as it is ?Depends on the chemical and the temperature. A good general rule of thumb is not to let chemicals dry on UPVC
It's hypo 1 to 8. And small amount surfactantWhat are you using and at what dilution rate ???
We use 6-1 on plastics ,that’s 6 parts water to 1 part hypo , sometimes Evan with a weak mix like this it can turn white plastic brown /yellow without the mix drying out , but once scrubbed and rinsed off it will return to white within a couple of hours , plastic doesn’t absorb the mix so it doesn’t need to be strong to kill algi .It's hypo 1 to 8. And small amount surfactant
Ok thanks. I pronounce it different for some reason it's 1 product 8 parts water I will change pronounce nowWe use 6-1 on plastics ,that’s 6 parts water to 1 part hypo , sometimes Evan with a weak mix like this it can turn white plastic brown /yellow without the mix drying out , but once scrubbed and rinsed off it will return to white within a couple of hours , plastic doesn’t absorb the mix so it doesn’t need to be strong to kill algi .
That will be fine doesn’t matter what you call it provided you use 8-1 , 8 water and 1 hypo and not the other way round ???Ok thanks. I pronounce it different for some reason it's 1 product 8 parts water I will change pronounce now
Thanks anyway
???That will be fine doesn’t matter what you call it provided you use 8-1 , 8 water and 1 hypo and not the other way round ???