Jump to content

Don't want to see ads? Become a subscribed member.

shurflo pump problem.....please help!!!


Guest easyclean7585

Recommended Posts

Guest easyclean7585

hi, my shurflo pump has stopped working for some reason. I have a digital varistream controller, at normal operating rates i would have it on 1. sometimes 2 if things were really grubby but usuallly 1 was more than adequate. i fired it up last week and long story short ended up running it on 0. Before 0 would barely punch water out and yet now its flying out like the equivalent of 3 or 4. Then it started shutting itself off because the rate was too fast. After priming it every two mins i managed a day running it on 0...although i did give up by about 12. The next day was the same for the first two houses then it just wouldnt run. It turns on and runs for about half a second and the light flashes from green to red, its beghaving like there is a restriction. I took it apart today and cleaned the strainer etc and replaced a few wires etc. I also checked the diapragm and it seemed ok. Even in my kitchen with no water supply it keeps shutting off like theres a restriction. I really dont know what to do. I would appreciate any help you guys could offer...seriously...i will try anything. I would prefer not to have to buy as new one just yet. Thanks, mike

Link to comment
Guest colinvansmith

Been having the same kinda problems i found that if i make sure there is no pressure in my hoses when i trun the pump off, i get no problems when i turn it on. How do you prime your pump?

Link to comment

Don't want to see ads? Become a subscribed member.


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Ad Blocker Detected

Please disable your ad blocker

Our forum relies on ads to pay for the servers and our time maintaining and running the forum.

Sadly running a forum like this is not free, and due to our popularity, we need servers that can handle the amount of traffic and resources our forum uses.

 

If you do not wish to see ads on our site, please consider supporting the forum with a membership subscription.

 

Accept