Hi I just had a wfp system fitted this weekend which I wanted to try out for the first time today but having some teething problems if anyone can help me out I'd appreciate it thanks
Anyway problems I'm having are first off is I just tried to fill my tank and after 4 hours I only filled a 400l tank (with RO 600gpd & DI filters) about an inch and a half, from what I've been told it should take 3-4 hours to fill the whole tank, was having a leak from the horizontal filter which was about half the trickle compared to the trickle in the tank, what could be the problem there ?
2nd problem I couldn't get it to pump any water out at first until I parked on a slope and then managed to get some flow and sputtering, will they not pump very well unless the pipe in the tank is fully submerged ?
Anyway hope someone can advise me
Many thanks Rob
Anyway problems I'm having are first off is I just tried to fill my tank and after 4 hours I only filled a 400l tank (with RO 600gpd & DI filters) about an inch and a half, from what I've been told it should take 3-4 hours to fill the whole tank, was having a leak from the horizontal filter which was about half the trickle compared to the trickle in the tank, what could be the problem there ?
2nd problem I couldn't get it to pump any water out at first until I parked on a slope and then managed to get some flow and sputtering, will they not pump very well unless the pipe in the tank is fully submerged ?
Anyway hope someone can advise me
Many thanks Rob