Jump to content

Don't want to see ads? Become a subscribed member.

Attaching a brush head


WinWiz

Recommended Posts

I have an embarrassingly stupid question...

When you attach a brush head, how do you ensure that when you are done screwing it on securely, it's square-on to the glass and not tilted down to the left or right.

It seems to be a bit pot luck with how the 2 screw threads meet.

Link to comment
A pic would help. I'm thinking that you haven't screwed the brush with socket attached to a resi neck enough to get it square.

The problem is... You turn it until it is tight. It may or may not be square at that point.

Link to comment

I'm guessing you want the brush flat against glass & pole clamps lined up?

Try first lining up the clamps to the brush then tighten up & if it's not lined up then unscrew & turn pole with clamps not lined to left to the degree it was off when you tightened it to then screw together.

Hope that made sense!

Link to comment
Ah, so you reckon he has a pole with vertical clamps and that's what not's straight. I was thinking he needed to screw the neck on tighter.

No I need to "screw it on tighter". But if I do, I'll strip the thread.

Link to comment

Don't want to see ads? Become a subscribed member.


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Ad Blocker Detected

Please disable your ad blocker

Our forum relies on ads to pay for the servers and our time maintaining and running the forum.

Sadly running a forum like this is not free, and due to our popularity, we need servers that can handle the amount of traffic and resources our forum uses.

 

If you do not wish to see ads on our site, please consider supporting the forum with a membership subscription.

 

Accept